Fadal VMC-4525 Vertical Machining Center


Fadal VMC-4525 Vertical Machining Center

Stock Number: 10082

Fadal VMC-4525

Age: 2005

Condition: Appears Excellent

Price: $54,500


Fadal's Performance Series Machine - The VMC-4525 is a robust machine with heavy cast iron construction and high torque spindle, which reduces cycle time for heavy cutting operations including steel. Wider castings increase rigidity and coupled with the box ways, Cool Power and large 40 mm diameter ball screws, enable the 4525 to deliver tolerances of 0.00016. High performance features of the 4525 include an automatic two-speed spindle drive system, parallel processing and optional chip wash-down and auger system. The 4525 VMC features heavy cast iron Box Ways, which provide large surface area contact for maximum vibration damping and rigidity. A leading-edge AC Vector Drive system with a high torque 22.5 HP spindle motor delivers 270 ft/lbs. of peak torque and maintains consistent torque over the full RPM range from 10-10,000 RPM with closed loop feedback. The automatic two-speed spindle drive system features a mechanical, two-speed gearless system that delivers higher performance at a wider range of RPM, which results in reduced noise, heat, vibration and power loss associated with gear boxes.

Fadal VMC-4525 Vertical Machining Center, Click to view larger photo...       Fadal VMC-4525 Vertical Machining Center, Click to view larger photo...       Fadal VMC-4525 Vertical Machining Center, Click to view larger photo...      
Click to view larger photo


SpecificationDescription
Table Size:53.5" x 25"
Table Load Capacity:4250 lbs
Travels:45" x 25" x 24"
Spindle Nose to Table Top:4.0" - 28.0"
Rapid Traverse (X & Y / Z):900 ipm / 700 ipm
Cutting Feedrate:0.01 to 250 ipm
Spindle Speed:10 - 10000 rpm
Spindle Taper:CAT-40
Spindle Motor:22.5 hp
ATC Positions:24
ATC Type:Twin Arm, Side Mount
Maximum Tool Diameter:4" / 6" with adj pocket empty
Maximum Tool Length:15"
Maximum Tool Weight:15 lbs
Machine Size:130" x 102" x 125" Tall
Machine Weight:13,600 lbs
Pwer Requirement:220v, 3 Phase, 65 KVA
  

Equipped With:
* Fanuc 18iMB5 CNC Control with Ai Nano High Speed 3D
* Dataserver
* Soft/Stop Stop limit check
* Additional memory
* PCMCIA drive
* MB3
* Cool Power on Spindle and Ball Screws X,Y,Z
* 3,000 RPM Rigid Tapping
* 24" Z Axis Travel
* Full Enclosure
* Manuals


HomeIndexContactView Cart


Fadal VMC-4525 Vertical Machining Center
Edge Machine Tools, Inc
902 S Randall Rd, Suite C-237
St Charles, IL 60174
630-444-7344
630-444-7445
Sales@edgemachinetools.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com